Schmidt trigger input for the dual band amplifier

50% +DUT drive signal on the gate of one of the four MOSFETs

Schmidt trigger circuit installed

I have improved the amplifier efficiency by increasing the duty cycle ( +DUT ) of the drive signal on the MOSFETs' gates from 43% to 50% with the addition of a Schmidt trigger first stage. After experimenting with several CMOS NAND and inverter logic chips, ( i.e., CD4093BE, CD74HCT132E, SN74HC14N, SN74HCT14N ), which already have Schmidt trigger inputs, I found I could only obtain the 50% +DUT I wanted by making my own Schmidt trigger circuit using a quad 2-input NOR gate chip ( CD4001BCN or HEF4001BP ). I eventually decided to retain the older CD4001BCN in the circuit as the low pulse rate doesn't really justify using the newer HEF4001BP for this application. I built the circuit on a tiny piece of pad board and fitted it above the main driver circuit board. ( See also post dated 6 December 2015 ).