My LF radio transmissions in February 2026

🔘I was particularly active transmitting on  the LF ∿136KHz/2190m long-wave 📻radio band during 📅February.  My radio transmissions on that band have now paused until I resume them later in the year when the long nights return.

My transmitter ⚡is home made to my own design. The output power is 150 watts. My🗼 antenna consists of vertical sections of aluminium tube totalling 📏14m long  to the top of which is connected a wire which extends horizontally for 📏47m. Two loading coils➿➰are also connected; one ➿at the base of the vertical section and the other ➰to the far end of the wire. Both the 🗼antenna & transmitter have been featured in several previous posts.

The modes which I predominantly used were the 32 minute ⏳beacon mode called "Opera32", and the slow morse modes known as "DFCW10" ( Dual Frequency CW with 🕑10 second dashes ) and "QRSS4" ( 🕑4 second dots ).

My transmissions were reliably received 🎧by the 📻receiving station ( 'grabber' ) of DL0AO near Amburg in Germany at a distance of 700 kilometres. The signals being received can be viewed 🔗online in near real-time, from which I made the screen-shots below. Additionally my Opera-32 signal was at various times also received in 🗺 Greece, Croatia, Norway, Russia & Sweden.

List of Opera32 detections by DL0AO

 

Opera32

DFCW10

QRSS4

I have had 2-way contacts with radio amateurs in 11 other countries on the 2190m band. Unfortunately during February 2026 my transmissions were not answered !

Chirp-Hell on longwave

On 14th November 2012 I reported success with the tests on the work-bench of the improved ssb phasing exciter for my 2190m longwave transmitter. Soon after that I installed it inside the transmitter enclosure. Since then I had been waiting for an opportunity to test it using full transmitter power into my antenna in a real 'on-air' situation, with a more distant receiver. 

So early this morning at about 1.00am I carried out transmission tests with Jacek, SQ5BPF, in Warsaw. My signal was quite readable on his grabber; screen captures above. The noisy band conditions at his location are also very evident.

I was transmitting on 136.9KHz upper sideband, modulating with 800-810Hz chirp-hellschreiber audio tones. Transmission speed was either 5 or 10 secs/character; the vertical markers are 1min apart. We then completed a chirp-hell to qrss1 cross-mode contact; quite obscure, so it's probably the first time ever it has been done !

New antenna radiates

The new antenna for longwave, mentioned last time, radiates. I have been making some test transmissions on 137.7KHz and these transmissions have been received by Jacek, callsign SQ5BPF, on the other side of Warsaw. The screen capture below shows how he saw my signal on his 'lf grabber'. Incidentally, he could also hear it.
So now I have a reference signal with which to compare future signals as I make improvements to the antenna installation; the aim being to make the signal stronger and the signal trace white rather than the orange colour it is now. Losses in the system have to be reduced. To achieve this, I shall start by burying more copper in the garden. This will be a very labour intensive and time consuming activity. I shall probably be eaten alive by mosquitos before completion ! I hope to report total success in the near future - if I survive the ordeal.

More "firsts" on longwave

Yesterday evening, Szigy, callsign YO2IS, in Timisoara, Romania, 710 kms away, and I had a contact on the 2190m longwave band, which we will claim as the first ever Romania - Poland contact on that band, thereby adding Romania to my two prior "firsts" with the Czech Republic and Belarus.
I copy part of Szigy's email which he sent to me soon after our meeting 'on the air', particularly because it emphasises how challenging amateur radio communication is on longwave; as I know only too well myself, even over distances of just a few hundred kilometres. Szigy wrote:

"Dear Steve pleased to run a fine QSO with you, the very first SP-YO on 2.2Km. Signal was nice but with a deep QSB on the midle of the QSO. At the beginning had some problem with a flashover in the teflon feedtrough my window, it take one hour to change the isolator.Will send you a direct QSL in the next days. Once more thanks for the new one ! Have fun on VLF it's always a big chalenge, gl."

One of the challenges is typically the use of short inefficient antennas, ( because of the nearly 2.2km wavelength ), causing high voltages of several KV to appear at various places in the antenna system. Unluckily for Szigy during our contact, he had to take time out to tackle a problem of insulator flashover !
Earlier this week, I cleared ice and snow from my antenna in order to make it useable once more; but even then I had a flashover problem which I was able to prevent happening again, and fortunately nothing went wrong at my end during the contact with Szigy.

Stop press: In the last few minutes I have achieved another "first", Estonia. Incredible conditions on longwave this weekend, and some stations active making the most of them. What a start to 2011 on 2190 !

Four on longwave

Most weekends, except in summer, I am transmitting my radio signal on longwave, ( 2190m / 137.7KHz ), and hoping someone will reply. Usually my signal goes unanswered as no one else is about; but last night Marek, a Polish radio amateur, callsign SP2OVY, from near Gdansk, called me. I had never received his signal before. So I assume that he has only recently begun to transmit on longwave. To my knowledge there are now 4 Polish stations, including myself, who have transmitters for the 2190m band; though I am aware of a few others who monitor on receive only. Two years ago I was the only one active on longwave in Poland. So the numbers are gradually increasing.
The distance between Marek and me is only 277kms; but I was happy my signal made it that far as snow on my antenna had significantly detuned it. We had a successful 2-way contact, ( report "O" bothways ), ending in the early hours of this morning.
The screen capture shows his slow morse ( QRSS ) signal to which I have added the letters; of course 'E' and 'N' were the following two letters on the next screen capture, ( not shown ).
I am still using the same home-made transmitter and antenna which I featured on the blog on 25th January and 19th February.

Weather bad, longwave good

Tonight it is snowing again. The large coil is outside and connected to my antenna, but has little protection from precipitation. Although the weather is poor, radio propagation conditions on longwave tonight have been good. I have just completed a contact with Gerhard in Austria. The screen shot shows him calling me at the start. The other horizontal lines are sidebands from the LORAN-C navigational system on 100KHz. There are LORAN-C sites in coastal regions of northern Europe. We have to put up with its interference until the system is supersceded by GPS. The sound it makes is like a steam locomotive travelling at 100mph. To our advantage, however, these 'lines' give a useful indication of propagation conditions on 136KHz, and were strong and clear tonight; hence the possibility for my contact with Gerhard.
My signal was also picked up 745 kms away in Nuernberg, Germany !

Friday night activity night

Yesterday evening the first activity period on longwave took place, to encourage Polish radio amateurs with longwave receiving and/or transmitting equipment to meet up "on the air". I think that in Poland only myself and one other guy can transmit on 2190m wavelength. Amateurs' antennas for this wavelength are relatively short and inefficient. So we have to transmit information slowly in a very narrow bandwidth to have any chance of being picked up. As an example, the screen capture shows how my slow morse signal, ( 4 sec dot , 12 sec dash ), was received by another Polish receiving station during this activity period.