Analog Devices AD9850 frequency synthesiser

AD9850 evaluation board, 45mm x 26mm

Connected to MYDEV2 PIC MSSP module for programming

SINA and QP outputs

Another visit to an online auction site and another electronics purchase. This time I spent $9 on an evaluation board for the AD9850 frequency synthesiser chip. Surely the 125MHz 'can' oscillator and the chip itself are individually worth more than that. However it was made in China.
I mounted it on a larger piece of experimenter board and connected its programming inputs to a microcontroller PIC18F4550 on my MYDEV2 PIC development board. Before the AD9850 will produce an output signal it has to be programmed.
So I wrote a few lines of code to use the PIC's Master Synchronous Serial Peripheral ,( MSSP ), interface module to send the 40 bits of frequency, phase and control data to the AD9850.
The resultant output signals are a sine wave ( CH1 yellow trace ) of 1.04V peak-peak directly from the chip's digital-analogue convertor, ( DAC ), and a variable pulse-width square wave ( CH2 blue trace ) of 5V peak-peak via the chip's comparator for use as an external clock.
I have intentionally allowed plenty of space on the experimenter board to fit a dedicated PIC later; probably the PIC18F14K22 as I already have one.
The AD9850 will be a useful signal source and clock generator upto about 40MHz.

MyDev2 enhanced

Schematic - note Vcc connection depends on usb-powered or self-powered application

I have upgraded to version 3 my PIC MCU development platform, MyDev2, ( first posted on November 2nd, 2010 ), with the addition of pull-down resistors R25-R28 for the keypad rows connections now that I have decided on the method I will use in coding the operation of the keypad and the interfacing required to the microcontroller. I have already started writing the code in 'C' programming language, instead of the 'Assembly' language which I have used for all my PIC projects until now. The keypad will be a 'telephone' style 4 row x 3 column, 0-9, # and * type.
I have also fitted a new microcontroller type, Microchip part PIC18LF4455-I/P, which, as well as being a few cents cheaper than the original PIC18F4550 and PIC18F4685, has an extended operating voltage range, ( denoted by the 'L' in the part number ), down to +2V, as I want to experiment with coding the detection of switching off the power !